|
|
Design of the Flat Plate Slab
Krejčová, Jana ; Šulák,, Pavel (referee) ; Švaříčková, Ivana (advisor)
Bachelor thesis describes the design and assessment of monolithic concrete, locally supported roof structures of parking place and ramp, elaboration of shape and reinforcemenet drawings of selected structural element. The work also includes the teoretical part dealing with measures for buildings located in the gap. Calculation of internal forces was performed by komputer program SCIA Engineer in two different models. It was control by simplified method of summary moments and results were compared.
|
|
|
Sewage disposal plant
Doležal, Martin ; Kraut, Jan (referee) ; Šulák, Pavel (advisor)
This thesis deals with the design and static assessment of a concrete part of a sewage treatment plant. Specifically, the calculation and assessment of the base plate, external walls, internal walls and ceiling slabs, elaboration of shape and reinforcement drawings of selected structural element. The concrete part of the Sewage disposal plant is all below ground level. Static system and the calculation of internal forces was carried out in Scia Engineer 2011 - student version.
|
|
|
Design of concrete structures with FRP reinforcement
Januš, Ondřej ; Girgle, František (referee) ; Štěpánek, Petr (advisor)
The diploma thesis presents design of construction with FRP reinforcement. Including design process of cross-section with FRP reinforcement exposed to bending moment and shear force at ultimate limite state according to given standards and guidelines. Long term physical and mechanical properties of FRPs are taking into account. There are also compared load capacities of cross-section exposed to combination of bending moment and axial force, which were designed according to mentioned standards. In another part of diploma thesis there is a design of construction (precast gatehouse) with FRP reinforcement and steel reinforcement with ordinary and lightweight concerete.
|
|
|
Assembled structure of hall
Bartosch, Václav ; Chalivopulos, Paris (referee) ; Zich, Miloš (advisor)
Master´s thesis describes the design and static calculating of selected elements of prefabricated reinforced concrete hall with bulit-in office, elaboration of basic drawings of the project documentation, shape and reinforcemenet drawings of these selected structural prefabricated elements. The work also includes technical report, details of selected element´s contacts, drawing of plates and study of the behavior of reinforced buildings. Calculation was performed by using a computer program AxisVm, Microsoft Excel a IDEA StatiCa
|
|
|
The use of advanced composite materials for the design of concrete structures
Macháček, Jan ; Matušíková, Anna (referee) ; Girgle, František (advisor)
The diploma thesis deals with the design of concrete structures reinforced by FRP according to ACI, fib, CSA and EC2 regulations, which are stressed by a shear force. The diferences between steel rebar and FRP reinforcement were described, in particular its mechanical degradation over time and a different stress-strain diagram. Furthermore, shear capacity calculations were performed according to the regulations and compared with the real tests. Then the parametric analysis of shear strength was performed. In the practical part, the design of concrete floor slab structure supported by the pillars and walls was performed. The upper reinforcement of this slab was designed with FRP and the lower with steel rebar. Double-headed studs were used as a punching shear reinforcement.
|
|
|
The prefabricated factory building with office block
Krejčová, Jana ; Bažant, Zdeněk (referee) ; Čírtek, Ladislav (advisor)
Master´s thesis describes the design and assessment of selected elements concrete factory building with office block, elaboration of shape and reinforcemenet drawings of selected structural prefabricated elements. The work also includes technical report and details of connection elements. Calculation was performed also using a computer program SCIA Engineer and Excel.
|
|
|
Strength design of the press frame construction and the compliance calculation at the load position.
Dobeš, Martin ; Suchánek, Miroslav (referee) ; Vrbka, Jan (advisor)
The bachelor's thesis is intent on the calculation of a plane frame which is used for hydraulic press. The theoretical basis for the calculation is mentioned in the first part of this thesis. The calculation of a concrete exercise according to the task set in the bachelor's thesis is in the second part. As a frame model we used a plane frame with two crossbeams. The load on the plane frame is interpreted by solitary forces which work upon the crossbeams. The calculation uses the Castiglian's theorem to specify the unknown parameters from deformation conditions. The calculation considers flexion energy of tensity. In the next part of the calculation, we consider the energy of tensity caused by vertical and normal shear for comparison. Coordinates of the load position can be changed at will. The final results of the thesis are a concrete frame proposal and an examination of pliability of the frame. The calculation was carried out in MAPLE 11 software.
|
|
|
Planar frames and curved bars. Study of the significance of the influence of normal and shear forces on deformation characteristics of the centerline
Donát, Martin ; Fuis, Vladimír (referee) ; Suchánek, Miroslav (advisor)
The Aim of this thesis is to write up the relevancy of particular resultant inner effects (further denoted as RIE) on the central line bars and plane frames deformation. The relevancy of particular RIE on the choice deformation characteristic bars in dependence on the ration of central line length and characteristic cross-section proportions, support type and bar load is analyzed in the sample examples. We solve a problem whether a bent bar should be comprehended as a shall bent or as a forte bent bar and we also analyze how does the stiffness shift influence the fractional bar deformation. When solving the sample examples we suppose that the bar expectations are fulfilled. When determining the central line deformation we use the Castiglianano’s theorem because it enables to include supplies of particular RIE.
|
|
| |
|
|
Static solution of prefabricated hall
Koníček, Jakub ; Koláček, Jan (referee) ; Zich, Miloš (advisor)
The presented thesis deals with design and optimization of selected structural elements of high-load storage hall skeleton. As a basis for the solution is taken the structure of a real storage hall designed in the years 2017-2018. The structure is designed for minimum weight. For this reason, so-called D-regions are formed on the structure. For the solution of D-areas, general methods of solution, such as STM or nonlinear FEM analyses, are used in the thesis. In the final designed structural elements are compared to the original design of the hall. Thesis include static calculation of 24 m long roof beam V1, static calculation of 24 m long ceiling beam ST1, drawing documentation and technical report. Programs were used for the calculation: SCIA Engeneer 18.1, Idea StatiCa Beam10.1, Idea StatiCa Detail 10.1, RIB Fermo, PTC MathCad and MS Excel.
|
guest ::
